Virginia | Henry County / Smith River Blueway

Smith RiverMarrowbone Creek River Access to Mitchell Bridge River Access

A planning-only approximately 3.4-mile Smith River Blueway float from Marrowbone Creek River Access to Mitchell Bridge River Access, with Class I–II moving water, cold tailwater, and release changes from Philpott Dam.

Route location

Loading the route map.

Open access map

Plan this route

DistanceApproximately 3.4 river miles
DifficultyModerate
Typical timeAllow 1–3 hours depending on release
ShuttleCar shuttle
The Smith River in fog in Henry County, Virginia.
River contextSmith River in Henry County; same-river context river-level context — not necessarily this exact reach.Photo by MarmadukePercy via Wikimedia Commons

Need to know

Why this call
This route is documented for planning, but does not receive a Paddle Today score.
View Primary Source
Embed this route

Route alerts

Email me when this route improves

We'll email you when this route climbs into Good or Strong. Every email includes an unsubscribe link.

We only email on a new threshold crossing.

Trip details

Access rules, camping, seasonal conditions and trip length.

Distance, difficulty, rules and camping
DifficultymoderateThe Blueway describes Class I–II water with cold tailwater, release changes, rocks, strainers, and public-access transitions.
PermitsNone notedNo route-specific paddling permit is published. Follow Virginia boating and PFD rules, Henry County access rules, posted closures, and all private-property boundaries.
CampingDay tripNo endpoint or on-route camping is claimed. Use separately verified lawful lodging or a designated regional campground; do not camp at either public access.
SeasonMar-NovPhilpott generation controls the tailwater and can change conditions quickly. Check direct Bassett telemetry, generation timing, recent rain, water temperature, debris, daylight, and both access areas before launch.

Tomorrow and the weekend

Forecasts can change. Check current conditions again before leaving.

TomorrowChecking

Waiting on forecast.

WeekendChecking

Waiting on forecast.

Plan your trip

Launch points, shuttle details, distance, and access notes.

Access and shuttle

A public 3.4-mile Smith River Blueway section with Class I–II water, direct Bassett gauge context, Philpott release dependence, and named public endpoints.

Access map

Skip map

Pulling access map tiles. Usually under 5 seconds.

End of map
Start

Put-in

Marrowbone Creek River Access

Marrowbone Falls is immediately below the Marrowbone access. Mitchell Bridge is the last public Henry County access; do not continue toward Morgan Ford without a separately verified take-out and dam/portage plan.

Finish

Take-out

Mitchell Bridge River Access

The Blueway’s 65–1,400 cfs value is release context, not a safety limit. Compare telemetry, generation timing, and the water-level visual before launch.

Road shuttle

Access notes and hazards

Access caveats

  • Marrowbone Falls is immediately below the Marrowbone access. Mitchell Bridge is the last public Henry County access; do not continue toward Morgan Ford without a separately verified take-out and dam/portage plan.
  • The Blueway’s 65–1,400 cfs value is release context, not a safety limit. Compare telemetry, generation timing, and the water-level visual before launch.
  • The selected Mitchell Bridge River Access endpoint is the hard downstream boundary for this route; continue only with a separate verified plan and shuttle.

Watch for

  • USGS 02072500 unavailable, rapidly rising, or inconsistent with the put-in visual; also confirm the Philpott generation hotline
  • Class I–II rapids, rocks, strainers, bridge current, cold water, storms, and floating debris
  • closed or full access, slippery carry, private banks, a missed take-out, or loss of daylight

Choose your trip times

No account needed. Check the selected access points above, then choose both dates and times. For an overnight paddle, set take-out to the following date.

Trip schedule

Times use the selected time zone. Check it against the river’s location before saving or sharing.

Browser plans stay on this device. Sharing opens your device’s share tools or gives you text to copy.

Download GPX Route geometry only; no schedule required.

Water levels, gauge history, and hourly forecast

Check the forecast and local water levels before launching.

Water-level history and forecastDetailed view

Recent trend

Checking preferred range.

Checking trend.

------------

Hourly forecast

Checking weather.

Loading today's forecast.

Short-route forecast

Checking the next several hours.

Checking the best short-route window.
----Loading--

Data and sources

Read the access and hazard notes and check the linked guides. We do not issue a daily score for this trip.

What to know before you go

These notes cover the access details, route quirks, and source caveats most likely to matter once you get there.

  • Named public moving-water corridorMarrowbone Creek River Access to Mitchell Bridge River Access; approximately 3.4 miles; Class I–II

    The current Smith River Blueway access list and county brochure name both public endpoints, distance, rapid class, and travel context.

    Source

  • Gauge and release guidanceUSGS 02072500 at Bassett; 65–1,400 cfs release context and Philpott generation hotline

    The Blueway and local access pages direct paddlers to the direct gauge and generation schedule; no station-specific recreational cutoff is inferred.

    Source

  • Endpoint access and coordinatesMarrowbone Creek River Access (36.6134323, -79.8235886) to Mitchell Bridge River Access (36.5978174, -79.7827387)

    Official tourism and county records identify both public access areas. Coordinates are access-area/address anchors and require exact wetted-edge confirmation.

    Source

  • Safety and camping postureClass I–II; cold water; Philpott release changes; nearby basecamp only

    Official Blueway and access guidance requires PFDs, cold-water preparation, release checks, legal public access, and a separate camping decision.

    Source

  • Duplicate separationDistinct Marrowbone Creek River Access to Mitchell Bridge River Access section with named endpoint boundary

    The route has its own Blueway endpoint pair and is adjacent to, rather than overlapping, the other Smith River segments.

    Source

Check the source links

Paddler reports

See recent photos and notes from people on the route.

Help build the route page

Add photos or send a quick condition report.

Photos

Upload route photos

Add access, hazard, or on-water photos.

No files selected yet.

Compare another stretch on this river, or explore different rivers within 75 straight-line miles.

Smith River paddling FAQ

What water level is best for the Marrowbone Creek River Access to Mitchell Bridge River Access route on the Smith River?

This planning route has no live Paddle Today score. Review the linked water-level sources, current access notices and route-specific hazards before travel.

Where does the Marrowbone Creek River Access to Mitchell Bridge River Access route on the Smith River start and end?

This route starts at Marrowbone Creek River Access and ends at Mitchell Bridge River Access, Approximately 3.4 river miles on the water.

Is the Marrowbone Creek River Access to Mitchell Bridge River Access route on the Smith River suitable for beginners?

This is listed as a moderate route. Review the difficulty notes, hazards and current access conditions against your group's skills. No live score assesses this trip.

See something outdated?

Access, hazards, wood, and shuttle details change. Send a quick correction if something looks off.