See all 5 routes on Saline River
Arkansas | Central Arkansas
Saline River
Peeler Bend to Lyle Park Access
Check current paddling conditions for this Saline River route, including water level, recent gauge trend, weather, and route details.
Route snapshot
Loading the route snapshot. This usually takes a few seconds.
Today
Get the answer fast, then scan the route.
Start with the verdict, current conditions, route plan, and quick facts before you commit to the drive.
Today's conditions
Gauge
Recent trend
Checking preferred range.
Checking trend.
Gauge source
--Checking timestampMN DNR provides the current paddling level here, but not chart-ready recent samples.
Weather
Best window today
Checking weather.
Today by hour
Short-route forecast
Checking the next several hours.
Quick facts
Plan
Dial in the shuttle, distance, and access.
Use this section once the route looks viable and you need to turn it into an actual trip plan.
Access plan
Access, shuttle, and map
Launch at Peeler Bend and take out at Lyle Park for the short middle Benton Saline River split. The direct Benton gauge works well here because the route finishes before the downstream spillway and low-water-bridge hazard package.
Put-in
Peeler BendOpen mapPeeler Bend is a simple public access with limited developed support in the reviewed source set.
Take-out
Lyle Park AccessOpen mapLyle Park is the clean public take-out before the lower-river spillway and low-water-bridge hazards downstream of Benton.
Pulling access map tiles. Usually under 5 seconds.
Access caveats and watch for
Access caveats
- Peeler Bend is a simple public access with limited developed support in the reviewed source set.
- Lyle Park is the clean public take-out before the lower-river spillway and low-water-bridge hazards downstream of Benton.
- The current Benton gauge reading during this run sat below the broad paddle band, so expect more scraping and slower shoals than on stronger flow days.
- Stay with the named public access points and avoid private banks, fences, signs, and purple-painted property lines along the corridor.
Watch for
- Low water around and below 3.5 ft, when dragging across shoals and slower pools becomes more likely.
- Higher water above about 5.0 ft, when AGFC says the river becomes experienced-only with faster current and less forgiving eddies.
- Fast chutes, riffles, strainers, fresh flood wood, muddy exits, and pushier current after thunderstorms.
- Private banks, anglers, swimmers near town, and short-notice thunderstorms on this more urban split.
Route gallery
See this route on the water
Photos help show what the access looks like and what the route actually feels like on the water.
No approved route photos yet
Start the gallery with shots of the access, river character, or any detail that helps paddlers know what this run actually looks like.
Sources
Check the data behind today's call.
Use this section when the page shows stale data, limited confidence, or a call you want to verify before driving.
Why this scoreToday's data confidence is checking
Data confidence mostly comes down to three things: how direct the gauge is, how clear the range is, and how fresh the data is.
- Checking data confidence notes.
- Checking data confidence cautions.
OutlookTomorrow and weekend
This is a cautious early look. If the data is too thin, we leave it out.
Waiting on forecast.
Waiting on forecast.
Data behind the scoreGauge, thresholds, and timing
These are the live readings and threshold notes behind today's score.
| Gauge site | Saline River at Benton, AR |
| Gauge height | Checking |
| Discharge | Checking |
| 24h trend | Checking |
| 24h change | Checking |
| Current band | Checking |
| Rain last 24h | Checking |
| Rain last 72h | Checking |
| Air temp | Checking |
| Water temp | Checking |
| Wind | Checking |
| Gusts | Checking |
| Rain timing | Checking |
| Target band | 3.60 ft to 5.00 ft |
| Low threshold | 3.50 ft |
| High threshold | 5.00 ft |
| Data confidence behind the range | Official data source |
| Gauge observed | Checking |
| Paddle Today updated | Checking |
| Main source behind this score | Arkansas Game and Fish Saline River Water Trail gauge bands |
| Gauge source | Checking |
| Weather source | Checking |
| Rainfall source | Checking |
NotesWhat to know before you go
These notes cover the access details, route quirks, and source caveats most likely to matter once you get there.
- Official route segmentPeeler Bend to Lyle Park, 3.8 miles
AGFC lists Peeler Bend to Lyle Park as an exact Saline River Water Trail segment and identifies it as a 2 to 3 hour float under normal conditions.
- Direct live gaugeUSGS 07363000
USGS Water Services returned same-day Saline River at Benton values of 72.0 cfs and 3.47 ft at 2026-06-25 03:30 CDT during this run, below the broad public recommendation.
- Stage model3.5 / 3.6-5.0 / 5.0 ft
AGFC labels 3.5 ft and below as low, 3.6-4.0 ft as typical, 4.1-5.0 ft as optimum, and 5.1-5.5 ft as high experienced-only water. Paddle Today uses 3.6-5.0 ft as the broad audience band and treats water above 5.0 ft as outside the general recommendation.
- Put-in accessPeeler Bend, 34.5852, -92.6467
AGFC publishes Peeler Bend as a named public Saline River Water Trail access with a Google Maps coordinate link.
- Take-out accessLyle Park Access, 34.5873, -92.6051
AGFC publishes Lyle Park Access as a named public Saline River Water Trail access with a Google Maps coordinate link.
- Route characterDeep pools, fast chutes, riffles, small waves
AGFC says paddlers can expect deep pools, fast chutes, riffles, and small waves on this Benton reach, with about two miles per hour travel under normal conditions.
Verify it yourselfCheck the source links
Use these links to double-check the gauge, route details, and access notes before you head out.
Paddler reports
Recent notes from paddlers
A few quick notes from people who were on this route recently.
Reports
Photos, paddler notes, and updates.
See what others have shared, then add a condition report, upload photos, or flag anything that needs fixing.
Share your trip
Keep exploring
More routes to check next
Compare another stretch on this river, or jump to nearby options before you pick a plan.
Quick answers
Saline River paddling FAQ
What water level is good for paddling Saline River?
Paddle Today watches Saline River at Benton, AR and treats 3.60 ft to 5.00 ft as the target band for this route, with weather and recent trend included in the final score.
Where does this Saline River route start and end?
This route starts at Peeler Bend and ends at Lyle Park Access, about About 3.8 mi on the water.
Is this Saline River route good for beginners?
This is listed as an easy route, but conditions still matter. Check today's score, water level, weather, and access notes before you go.
Flag a change
See something outdated?
Access, hazards, wood, and shuttle details change. Send a quick correction if something looks off.